VMS Racing Lowering Kit For 20-24 Corvette C8 Front End Lift Option E60 W/ Gps

Description: NEW VMS Racing front lowering kit for the C8 Corvette WITH the Front Lift Option E60 (with GPS front lift). The VMS Racing lowering kit is a simple replacement of the stock front lift actuator seat, and is designed to lower the front of your C8 Corvette either 0.75 or 0.50 inches. If you do not use the 0.25 spacer, then you get a 0.75 inch drop, and if you use the spacer you get a 0.50 inch drop. The spacer is a great tool to fine tune your ride height, especially if you plan to lower your car even further than 0.75 inches with the addition of lowering springs. This kit will allow you to drop your car .075 inches, just like the factory Z51 cars that do not have the front lift option. In the rear you can lower the car with the factory adjustable collars, you will need a coil over wrench set. We will soon have our own coil over wrench set, so stay tuned!This kit also comes with a de-pin tool so that you can easily de-pin the shock connector on the mag ride cars. Features:Machined from 6061 T-6 billet aluminumLowers you front end 0.75 or 0.50 inchesComes with the Mag Ride de-pin tool for the shock connectorDesigned in the USARed anodized with the VMS laser logoRetains full functionality of your front lift option, your car will still rise up.No trimming is needed of your bump stops as GM designed the Z51 cars to be able to be lowered .75 inches (maximum factory allowed). The bump stops on all C8's are the same, so no trimming is required

Price: 89.95 USD

Location: Miami, Florida

End Time: 2024-12-26T18:42:15.000Z

Shipping Cost: 0 USD