Trigger Slop Remover (PETG) for Dart Zone Pro Mk-2.1

Description: This part is superglued onto the end of the trigger piece of the Dart Zone Pro Mk-2.1 to shorten the trigger pull allowing for quicker shots! Any multi-item order with this item included will have $3 refunded per trigger slop remover. Attribution: Designed by Transmogrification Labs. Includes: 1x Dart Zone Pro Mk-2.1 Trigger Slop Remover. Installation: Open the blaster and remove the trigger assembly. Glue this piece on the end where it contacts the catch and orient it so that the leading edges align with the end of the trigger. Make sure it does not stick too far up above the line of the trigger. Done! Notes about material: This product is printed in PETG material which offers superior thermal resistance and increased durability compared to PLA products. PETG has a higher glass transition temperature of 80°C whereas PLA is 60-65°C. For PLA, this is within range of the temperatures that often occur inside a vehicle during summertime so items made from PLA may end up warping in those situations. The same issue can possibly occur from exposure to direct sunlight if the temperature is high enough. PETG has a much higher glass transition temperature however so you are very unlikely to ever experience issues with it warping in addition to it just being stronger in general. PETG products do come at a higher cost than the same product in PLA because PETG takes longer to print and also requires more time to clean up after printing but the result is a very high-quality product. Disclaimer: All of my products are printed and tested with the utmost attention to detail. Despite this, I am NOT responsible for any damage incurred to you or your blasters through the use of any of these parts alone or a combination with others. It is up to you to keep yourself and your blasters in functioning condition. Some prints may have visual imperfections as is common to all 3D printing (especially for PETG). These slight imperfections will not interfere with mechanical function or integrity/strength. Powered by ExportYourStore.com

Price: 3.2 USD

Location: Huntsville, Alabama

End Time: 2024-12-01T01:15:53.000Z

Shipping Cost: N/A USD