jetunit Stator For BMW Motorcycle F650GS F700GS F800GS 12317690427 12318524422

Description: jetunit Stator For BMW Motorcycle F650GS / F700GS / F800GS / F800GT / F800R / F800ST 2005-2018 KEY FEATURES Brand new aftermarket Stator Plug-and-play, direct fit, easy installation The quality exceeds the OEM equipment All products shipped are tested DESCRIPTION Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced. Brand new aftermarket stator Direct replacement to your original unit Plug-and-play, direct fit, easy installation Highest grade lamination materials Highest grade copper windings, resistant to 200 degrees Celsius. Connector included Rubber grommet included All products shipped are tested All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part. VEHICLE MODELS FITMENT BMW F 650 GS -- 2007-2012 BMW F 700 GS -- 2011-2018 BMW F 800 GS -- 2007-2018 BMW F 800 GS Adventure -- 2012-2018 BMW F 800 GT -- 2012-2016 BMW F 800 R -- 2006, 2009-2017 BMW F 800 S -- 2005-2008 BMW F 800 ST -- 2005-2013 OEM PART REPLACEMENT 12317690427 12318524422 SPECIFICATIONS Dimensions : Interior diameter : 53 mm Exterior diameter : 115 mm Thickness : 24 mm Length of wires stator to grommet : 123 mm Length of wires grommet to plug : 508 mm Other specifications : Number of wires : 3 Number of plugs : 1 Number of pins : 3 Wire to wire resistance : Alternator : Yellow Between Yellow = 0.4 ohms +-20% INSTRUCTIONS Before installing your new stator Check the AC output of the stator Replace any burned or corroded connectors on stator and regulatorrectifier Check and repair any melted wiring Use hi-temp dielectric grease on all connectors Our stator may use a different wire color code than your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound. If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Price: 65 USD

Location: Rowland Heights, California

End Time: 2024-07-20T05:09:29.000Z

Shipping Cost: 0 USD