4 Sizes Ring Guard-Guard Ring 14k White/Yellow Gold Filled Ring Size Adjusters.

Description: Women/Men s Ring Guard-White Gold OR Yellow Gold Filled Ring Size Adjusters. Very Easy to Install & the Ring Size Adjusters Solution. EACH ORDER= SMALL+MEDIUM+LARGE & X LARGE= 4 PCS What size ring guard should i buy?Some rings are heavier or have more girth to the band then the typical ring - be sure to make adjustments for this. The Size of the ring guard depends on the ring band (not ring size). The "arms" of the guard (size adjuster) must wrap to the inside of the ring.The guide below is to assist with typical ring bands. If in doubt - we have a mix pack available. Ring Guards are available in white or yellow 14 KT gold filled. Small / Medium Size Ring GuardsThe Small (18 X 2 mm) /MEDIUM (20 x 2 mm) Sized Ring Guard is ideal for a typical women's ring. The arms are about 6 mm's long which would fit a ring band of about 2 mm to 3 mm thickness.For Large/ Thicker banded RingThe Large ( 21 x 2 mm )Sized Ring Guard is ideal for a ring with a thicker band. The arms are about 11 mm's long which would fit a ring band of about 4 mm to 6 mm thickness. X-LARGE Size Ring GuardsThe X-Large ( 23 x 2 mm )Sized Ring Guard is ideal for a ring with a thicker band. The arms are about 11 mm's long which would fit a ring band of about 6mm to 10 mm thickness. Ring Guard InstructionsTools Needed: Pair of Chain Nose or Needle Nose Pliers Step #1: Place the ring guard with arms curved upward . Depending on the style of ring guard some might have arms going opposite directions, both are installed in the same manner. Step #2: Place the ring shank inside the curved arm of the ring guard. Step #3: Push down on ring guard so it takes the shape of the shank.Step #4: Be sure the shank rests at the back of the guard's arm (inside curve) for best fit.Step #5: With pliers, in a circular motion, tighten the ring guard arm to your ring's shank.Step #6: ....until the ring guards arm has gone around the inside of the ring shank and clamp down to tighten.Step #7: Repeat for second arm.Follow Up: Once the ring guard is in place you may adjust the 'size" of the ring. Just push up (or down) on the middle band of the ring guard to tighten or loosen it on your finger. Feel free to ask any questions.

Price: 13.99 USD

Location: Catonsville, Maryland

End Time: 2024-08-09T22:34:34.000Z

Shipping Cost: 0 USD