1pc CNC Shield V3.0 Extension Board + 4pc DC 12V

Description: >> DescriptionProduct Descriptions:Input Voltage: DC 12V - 36VModel: Stepper MotorCurrent: 150mAProduct Name: DC 12V - 36V Step-Motor Driver KitFeatures: - The expansion board has a total of 4 way stepper motor drive module slot, can drive 4 way stepper motor. It is very convenient to use, bid farewell to the traditional stepper motor performance cumbersome.- Package contents: 1 x CNC shield board, 4 x A4988 stepper motor driver, 4pcs heat sinks, 4 x 1.5m XH2.54 4pin to XH2.0 6pin stepper motor cable.- Use detachable A4988 or DRV8825 compatible with stepping driver, support GRBL 0.8, open source firmware, convert G-code commands into stepping signals.- The A4988 is a complete micro step motor driver with built-in converter for easy performance. The product can operate bipolar stepping motor in full, half, 1/4, 1/8 and 1/16 step modes. Low RDS(on) output, automatic current decay mode detection / selection. Overheat shutdown circuit, internal under voltage lock out (UVLO). Cross current protection, grounding short circuit protection, load short circuit protection.- PWM spindle and direction pin: PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4).- The CNC shield V3.0 expansion board can be used as a driving expansion board for engraving machine, 3D printer, etc.Voltage: DC 12V to 36V (only DRV8825 driver can handle up to 36V, so please consider voltage for power supply) 1 piece CNC Shield Expansion Board V3.0:- Operating Voltage: 5V- Digital I/O Pins: 14 (Including 6 with PWM Capability) - I-I/O Pin Output Current: 40mA Max- 3.3V Output Current: 150mA Max- Clock speed: 16MHz4pcs A4988 Driver: - Color: Red- Size: 20 x 15mm / 0.78 x 0.59"- Thermal Shutdown Circuit: Yes- Cross Current Protection: Yes- Ground Fault Protection: Yes- Short Circuit Protection: Yes- Compatible Logic Voltage: 3.3V and 5V- Five Step Modes: Full, 1/2, 1/4, 1/8 and 1/16 Mix with slow current attenuation model. Place of Application: - Engraver / 3D PrinterPackage Including:Package Including: 1 x CNC Shield Board4 x A4988 Stepper Motor Driver4 x Stepper Motor Cable4 x Heat Sinks Product Weight: 135 G / 4.76 OuncesProduct Dimensions (L*W*H): 195*145*18 MM / 7.68*5.71*0.71 InchesPackage Weight: 120.0 G / 4.23 OuncesPackage Dimensions (L*W*H): 200*150*20 MM / 7.87*5.91*0.79 InchesRetail Packaging: Yes, Colored Box >> Payment 1.When put the order in the awaiting payment,Payment must be paied within 20days.2.We accept payment by Paypal.3.Please write down your special requests.>> Shipping1.We only ship to eBay confirmed address2.Handling time is usually around 1-2 business days.3.Most orders are delivered within the stated shipping time at the time of purchase.4.Shipping are not available for PO BOX, Parcel locker, Parcel collect.5.If you don't receive your shipment within 35 days after payment, please feel free to contact us. We will take proper actions to solve the problem for you.

Price: 13.8 USD

Location: Shenzhen, Guangdong

End Time: 2024-12-13T05:34:52.000Z

Shipping Cost: 0 USD